From 80259d0d087ff18d3d58a9c351761b8dc4f49fe2 Mon Sep 17 00:00:00 2001 From: Stochastica Date: Sat, 16 Jan 2021 23:28:18 -0500 Subject: [PATCH] Add spacemacs and IPython script --- README.md | 6 + home/spacemacs | 587 +++++++++++++++++++++++++++++++++++++++++++++++++ scr/ipython.sh | 6 + symlinks.sh | 1 + 4 files changed, 600 insertions(+) create mode 100644 home/spacemacs create mode 100755 scr/ipython.sh diff --git a/README.md b/README.md index a00a996..1466b28 100644 --- a/README.md +++ b/README.md @@ -26,3 +26,9 @@ for jupyter. To use them with GPU, add the following to The `latex` docker contains tools for compiling `latex`. The `route` docker is used to setup a socks5 proxy server using `ssh`. + +## Scripts + +The `scr/` folder contains dockerised scripts: +* `ipython.sh`: Dockerised IPython via `hub-jupyter` for syntax highlighting + and IDE support diff --git a/home/spacemacs b/home/spacemacs new file mode 100644 index 0000000..784df5d --- /dev/null +++ b/home/spacemacs @@ -0,0 +1,587 @@ +;; -*- mode: emacs-lisp; lexical-binding: t -*- +;; This file is loaded by Spacemacs at startup. +;; It must be stored in your home directory. + +(defun dotspacemacs/layers () + "Layer configuration: +This function should only modify configuration layer settings." + (setq-default + ;; Base distribution to use. This is a layer contained in the directory + ;; `+distribution'. For now available distributions are `spacemacs-base' + ;; or `spacemacs'. (default 'spacemacs) + dotspacemacs-distribution 'spacemacs + + ;; Lazy installation of layers (i.e. layers are installed only when a file + ;; with a supported type is opened). Possible values are `all', `unused' + ;; and `nil'. `unused' will lazy install only unused layers (i.e. layers + ;; not listed in variable `dotspacemacs-configuration-layers'), `all' will + ;; lazy install any layer that support lazy installation even the layers + ;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy + ;; installation feature and you have to explicitly list a layer in the + ;; variable `dotspacemacs-configuration-layers' to install it. + ;; (default 'unused) + dotspacemacs-enable-lazy-installation 'unused + + ;; If non-nil then Spacemacs will ask for confirmation before installing + ;; a layer lazily. (default t) + dotspacemacs-ask-for-lazy-installation t + + ;; List of additional paths where to look for configuration layers. + ;; Paths must have a trailing slash (i.e. `~/.mycontribs/') + dotspacemacs-configuration-layer-path '() + + ;; List of configuration layers to load. + dotspacemacs-configuration-layers + '(yaml + shell-scripts + ;; ---------------------------------------------------------------- + ;; Example of useful layers you may want to use right away. + ;; Uncomment some layer names and press `SPC f e R' (Vim style) or + ;; `M-m f e R' (Emacs style) to install them. + ;; ---------------------------------------------------------------- + ;; auto-completion + ;; better-defaults + emacs-lisp + ;; git + helm + ;; lsp + ;; markdown + multiple-cursors + ;; org + ;; (shell :variables + ;; shell-default-height 30 + ;; shell-default-position 'bottom) + ;; spell-checking + ;; syntax-checking + ;; version-control + treemacs + tabs + bibtex + git + latex + markdown + (ocaml :variables + ocaml-format-on-save t + ) + python + neotree + + (c-c++ :variables + c-c++-adopt-subprojects t + c-c++-backend 'lsp-clangd + c-c++-lsp-enable-semantic-highlight 'rainbow) + ) + + + ;; List of additional packages that will be installed without being wrapped + ;; in a layer (generally the packages are installed only and should still be + ;; loaded using load/require/use-package in the user-config section below in + ;; this file). If you need some configuration for these packages, then + ;; consider creating a layer. You can also put the configuration in + ;; `dotspacemacs/user-config'. To use a local version of a package, use the + ;; `:location' property: '(your-package :location "~/path/to/your-package/") + ;; Also include the dependencies as they will not be resolved automatically. + dotspacemacs-additional-packages '() + + ;; A list of packages that cannot be updated. + dotspacemacs-frozen-packages '() + + ;; A list of packages that will not be installed and loaded. + dotspacemacs-excluded-packages '() + + ;; Defines the behaviour of Spacemacs when installing packages. + ;; Possible values are `used-only', `used-but-keep-unused' and `all'. + ;; `used-only' installs only explicitly used packages and deletes any unused + ;; packages as well as their unused dependencies. `used-but-keep-unused' + ;; installs only the used packages but won't delete unused ones. `all' + ;; installs *all* packages supported by Spacemacs and never uninstalls them. + ;; (default is `used-only') + dotspacemacs-install-packages 'used-only)) + +(defun dotspacemacs/init () + + "Initialization: +This function is called at the very beginning of Spacemacs startup, +before layer configuration. +It should only modify the values of Spacemacs settings." + ;; This setq-default sexp is an exhaustive list of all the supported + ;; spacemacs settings. + (setq-default + ;; If non-nil then enable support for the portable dumper. You'll need + ;; to compile Emacs 27 from source following the instructions in file + ;; EXPERIMENTAL.org at to root of the git repository. + ;; (default nil) + dotspacemacs-enable-emacs-pdumper nil + + ;; Name of executable file pointing to emacs 27+. This executable must be + ;; in your PATH. + ;; (default "emacs") + dotspacemacs-emacs-pdumper-executable-file "emacs" + + ;; Name of the Spacemacs dump file. This is the file will be created by the + ;; portable dumper in the cache directory under dumps sub-directory. + ;; To load it when starting Emacs add the parameter `--dump-file' + ;; when invoking Emacs 27.1 executable on the command line, for instance: + ;; ./emacs --dump-file=$HOME/.emacs.d/.cache/dumps/spacemacs-27.1.pdmp + ;; (default (format "spacemacs-%s.pdmp" emacs-version)) + dotspacemacs-emacs-dumper-dump-file (format "spacemacs-%s.pdmp" emacs-version) + + ;; If non-nil ELPA repositories are contacted via HTTPS whenever it's + ;; possible. Set it to nil if you have no way to use HTTPS in your + ;; environment, otherwise it is strongly recommended to let it set to t. + ;; This variable has no effect if Emacs is launched with the parameter + ;; `--insecure' which forces the value of this variable to nil. + ;; (default t) + dotspacemacs-elpa-https t + + ;; Maximum allowed time in seconds to contact an ELPA repository. + ;; (default 5) + dotspacemacs-elpa-timeout 5 + + ;; Set `gc-cons-threshold' and `gc-cons-percentage' when startup finishes. + ;; This is an advanced option and should not be changed unless you suspect + ;; performance issues due to garbage collection operations. + ;; (default '(100000000 0.1)) + dotspacemacs-gc-cons '(100000000 0.1) + + ;; Set `read-process-output-max' when startup finishes. + ;; This defines how much data is read from a foreign process. + ;; Setting this >= 1 MB should increase performance for lsp servers + ;; in emacs 27. + ;; (default (* 1024 1024)) + dotspacemacs-read-process-output-max (* 1024 1024) + + ;; If non-nil then Spacelpa repository is the primary source to install + ;; a locked version of packages. If nil then Spacemacs will install the + ;; latest version of packages from MELPA. Spacelpa is currently in + ;; experimental state please use only for testing purposes. + ;; (default nil) + dotspacemacs-use-spacelpa nil + + ;; If non-nil then verify the signature for downloaded Spacelpa archives. + ;; (default t) + dotspacemacs-verify-spacelpa-archives t + + ;; If non-nil then spacemacs will check for updates at startup + ;; when the current branch is not `develop'. Note that checking for + ;; new versions works via git commands, thus it calls GitHub services + ;; whenever you start Emacs. (default nil) + dotspacemacs-check-for-update nil + + ;; If non-nil, a form that evaluates to a package directory. For example, to + ;; use different package directories for different Emacs versions, set this + ;; to `emacs-version'. (default 'emacs-version) + dotspacemacs-elpa-subdirectory 'emacs-version + + ;; One of `vim', `emacs' or `hybrid'. + ;; `hybrid' is like `vim' except that `insert state' is replaced by the + ;; `hybrid state' with `emacs' key bindings. The value can also be a list + ;; with `:variables' keyword (similar to layers). Check the editing styles + ;; section of the documentation for details on available variables. + ;; (default 'vim) + dotspacemacs-editing-style 'vim + + ;; If non-nil show the version string in the Spacemacs buffer. It will + ;; appear as (spacemacs version)@(emacs version) + ;; (default t) + dotspacemacs-startup-buffer-show-version t + + ;; Specify the startup banner. Default value is `official', it displays + ;; the official spacemacs logo. An integer value is the index of text + ;; banner, `random' chooses a random text banner in `core/banners' + ;; directory. A string value must be a path to an image format supported + ;; by your Emacs build. + ;; If the value is nil then no banner is displayed. (default 'official) + dotspacemacs-startup-banner 'official + + ;; List of items to show in startup buffer or an association list of + ;; the form `(list-type . list-size)`. If nil then it is disabled. + ;; Possible values for list-type are: + ;; `recents' `recents-by-project' `bookmarks' `projects' `agenda' `todos'. + ;; List sizes may be nil, in which case + ;; `spacemacs-buffer-startup-lists-length' takes effect. + ;; The exceptional case is `recents-by-project', where list-type must be a + ;; pair of numbers, e.g. `(recents-by-project . (7 . 5))', where the first + ;; number is the project limit and the second the limit on the recent files + ;; within a project. + dotspacemacs-startup-lists '((recents . 5) + (projects . 7)) + + ;; True if the home buffer should respond to resize events. (default t) + dotspacemacs-startup-buffer-responsive t + + ;; Default major mode for a new empty buffer. Possible values are mode + ;; names such as `text-mode'; and `nil' to use Fundamental mode. + ;; (default `text-mode') + dotspacemacs-new-empty-buffer-major-mode 'text-mode + + ;; Default major mode of the scratch buffer (default `text-mode') + dotspacemacs-scratch-mode 'text-mode + + ;; If non-nil, *scratch* buffer will be persistent. Things you write down in + ;; *scratch* buffer will be saved and restored automatically. + dotspacemacs-scratch-buffer-persistent nil + + ;; If non-nil, `kill-buffer' on *scratch* buffer + ;; will bury it instead of killing. + dotspacemacs-scratch-buffer-unkillable nil + + ;; Initial message in the scratch buffer, such as "Welcome to Spacemacs!" + ;; (default nil) + dotspacemacs-initial-scratch-message nil + + ;; List of themes, the first of the list is loaded when spacemacs starts. + ;; Press `SPC T n' to cycle to the next theme in the list (works great + ;; with 2 themes variants, one dark and one light) + dotspacemacs-themes '(spacemacs-dark + spacemacs-light) + + ;; Set the theme for the Spaceline. Supported themes are `spacemacs', + ;; `all-the-icons', `custom', `doom', `vim-powerline' and `vanilla'. The + ;; first three are spaceline themes. `doom' is the doom-emacs mode-line. + ;; `vanilla' is default Emacs mode-line. `custom' is a user defined themes, + ;; refer to the DOCUMENTATION.org for more info on how to create your own + ;; spaceline theme. Value can be a symbol or list with additional properties. + ;; (default '(spacemacs :separator wave :separator-scale 1.5)) + dotspacemacs-mode-line-theme '(spacemacs :separator wave :separator-scale 1.5) + + ;; If non-nil the cursor color matches the state color in GUI Emacs. + ;; (default t) + dotspacemacs-colorize-cursor-according-to-state t + + ;; Default font or prioritized list of fonts. The `:size' can be specified as + ;; a non-negative integer (pixel size), or a floating-point (point size). + ;; Point size is recommended, because it's device independent. (default 10.0) + dotspacemacs-default-font '("Source Code Pro" + :size 14.0 + :weight normal + :width normal) + + ;; The leader key (default "SPC") + dotspacemacs-leader-key "SPC" + + ;; The key used for Emacs commands `M-x' (after pressing on the leader key). + ;; (default "SPC") + dotspacemacs-emacs-command-key "SPC" + + ;; The key used for Vim Ex commands (default ":") + dotspacemacs-ex-command-key ":" + + ;; The leader key accessible in `emacs state' and `insert state' + ;; (default "M-m") + dotspacemacs-emacs-leader-key "M-m" + + ;; Major mode leader key is a shortcut key which is the equivalent of + ;; pressing ` m`. Set it to `nil` to disable it. (default ",") + dotspacemacs-major-mode-leader-key "," + + ;; Major mode leader key accessible in `emacs state' and `insert state'. + ;; (default "C-M-m" for terminal mode, "" for GUI mode). + ;; Thus M-RET should work as leader key in both GUI and terminal modes. + ;; C-M-m also should work in terminal mode, but not in GUI mode. + dotspacemacs-major-mode-emacs-leader-key (if window-system "" "C-M-m") + + ;; These variables control whether separate commands are bound in the GUI to + ;; the key pairs `C-i', `TAB' and `C-m', `RET'. + ;; Setting it to a non-nil value, allows for separate commands under `C-i' + ;; and TAB or `C-m' and `RET'. + ;; In the terminal, these pairs are generally indistinguishable, so this only + ;; works in the GUI. (default nil) + dotspacemacs-distinguish-gui-tab nil + + ;; Name of the default layout (default "Default") + dotspacemacs-default-layout-name "Default" + + ;; If non-nil the default layout name is displayed in the mode-line. + ;; (default nil) + dotspacemacs-display-default-layout nil + + ;; If non-nil then the last auto saved layouts are resumed automatically upon + ;; start. (default nil) + dotspacemacs-auto-resume-layouts nil + + ;; If non-nil, auto-generate layout name when creating new layouts. Only has + ;; effect when using the "jump to layout by number" commands. (default nil) + dotspacemacs-auto-generate-layout-names nil + + ;; Size (in MB) above which spacemacs will prompt to open the large file + ;; literally to avoid performance issues. Opening a file literally means that + ;; no major mode or minor modes are active. (default is 1) + dotspacemacs-large-file-size 1 + + ;; Location where to auto-save files. Possible values are `original' to + ;; auto-save the file in-place, `cache' to auto-save the file to another + ;; file stored in the cache directory and `nil' to disable auto-saving. + ;; (default 'cache) + dotspacemacs-auto-save-file-location 'cache + + ;; Maximum number of rollback slots to keep in the cache. (default 5) + dotspacemacs-max-rollback-slots 5 + + ;; If non-nil, the paste transient-state is enabled. While enabled, after you + ;; paste something, pressing `C-j' and `C-k' several times cycles through the + ;; elements in the `kill-ring'. (default nil) + dotspacemacs-enable-paste-transient-state nil + + ;; Which-key delay in seconds. The which-key buffer is the popup listing + ;; the commands bound to the current keystroke sequence. (default 0.4) + dotspacemacs-which-key-delay 0.4 + + ;; Which-key frame position. Possible values are `right', `bottom' and + ;; `right-then-bottom'. right-then-bottom tries to display the frame to the + ;; right; if there is insufficient space it displays it at the bottom. + ;; (default 'bottom) + dotspacemacs-which-key-position 'bottom + + ;; Control where `switch-to-buffer' displays the buffer. If nil, + ;; `switch-to-buffer' displays the buffer in the current window even if + ;; another same-purpose window is available. If non-nil, `switch-to-buffer' + ;; displays the buffer in a same-purpose window even if the buffer can be + ;; displayed in the current window. (default nil) + dotspacemacs-switch-to-buffer-prefers-purpose nil + + ;; If non-nil a progress bar is displayed when spacemacs is loading. This + ;; may increase the boot time on some systems and emacs builds, set it to + ;; nil to boost the loading time. (default t) + dotspacemacs-loading-progress-bar t + + ;; If non-nil the frame is fullscreen when Emacs starts up. (default nil) + ;; (Emacs 24.4+ only) + dotspacemacs-fullscreen-at-startup nil + + ;; If non-nil `spacemacs/toggle-fullscreen' will not use native fullscreen. + ;; Use to disable fullscreen animations in OSX. (default nil) + dotspacemacs-fullscreen-use-non-native nil + + ;; If non-nil the frame is maximized when Emacs starts up. + ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil. + ;; (default nil) (Emacs 24.4+ only) + dotspacemacs-maximized-at-startup nil + + ;; If non-nil the frame is undecorated when Emacs starts up. Combine this + ;; variable with `dotspacemacs-maximized-at-startup' in OSX to obtain + ;; borderless fullscreen. (default nil) + dotspacemacs-undecorated-at-startup nil + + ;; A value from the range (0..100), in increasing opacity, which describes + ;; the transparency level of a frame when it's active or selected. + ;; Transparency can be toggled through `toggle-transparency'. (default 90) + dotspacemacs-active-transparency 90 + + ;; A value from the range (0..100), in increasing opacity, which describes + ;; the transparency level of a frame when it's inactive or deselected. + ;; Transparency can be toggled through `toggle-transparency'. (default 90) + dotspacemacs-inactive-transparency 90 + + ;; If non-nil show the titles of transient states. (default t) + dotspacemacs-show-transient-state-title t + + ;; If non-nil show the color guide hint for transient state keys. (default t) + dotspacemacs-show-transient-state-color-guide t + + ;; If non-nil unicode symbols are displayed in the mode line. + ;; If you use Emacs as a daemon and wants unicode characters only in GUI set + ;; the value to quoted `display-graphic-p'. (default t) + dotspacemacs-mode-line-unicode-symbols t + + ;; If non-nil smooth scrolling (native-scrolling) is enabled. Smooth + ;; scrolling overrides the default behavior of Emacs which recenters point + ;; when it reaches the top or bottom of the screen. (default t) + dotspacemacs-smooth-scrolling t + + ;; Control line numbers activation. + ;; If set to `t', `relative' or `visual' then line numbers are enabled in all + ;; `prog-mode' and `text-mode' derivatives. If set to `relative', line + ;; numbers are relative. If set to `visual', line numbers are also relative, + ;; but lines are only visual lines are counted. For example, folded lines + ;; will not be counted and wrapped lines are counted as multiple lines. + ;; This variable can also be set to a property list for finer control: + ;; '(:relative nil + ;; :visual nil + ;; :disabled-for-modes dired-mode + ;; doc-view-mode + ;; markdown-mode + ;; org-mode + ;; pdf-view-mode + ;; text-mode + ;; :size-limit-kb 1000) + ;; When used in a plist, `visual' takes precedence over `relative'. + ;; (default nil) + dotspacemacs-line-numbers '(:visual t + :disabled-for-modes + pdf-view-mode + :size-limit-kb 1000) + + ;; Code folding method. Possible values are `evil', `origami' and `vimish'. + ;; (default 'evil) + dotspacemacs-folding-method 'evil + + ;; If non-nil `smartparens-strict-mode' will be enabled in programming modes. + ;; (default nil) + dotspacemacs-smartparens-strict-mode nil + + ;; If non-nil pressing the closing parenthesis `)' key in insert mode passes + ;; over any automatically added closing parenthesis, bracket, quote, etc... + ;; This can be temporary disabled by pressing `C-q' before `)'. (default nil) + dotspacemacs-smart-closing-parenthesis nil + + ;; Select a scope to highlight delimiters. Possible values are `any', + ;; `current', `all' or `nil'. Default is `all' (highlight any scope and + ;; emphasis the current one). (default 'all) + dotspacemacs-highlight-delimiters 'all + + ;; If non-nil, start an Emacs server if one is not already running. + ;; (default nil) + dotspacemacs-enable-server nil + + ;; Set the emacs server socket location. + ;; If nil, uses whatever the Emacs default is, otherwise a directory path + ;; like \"~/.emacs.d/server\". It has no effect if + ;; `dotspacemacs-enable-server' is nil. + ;; (default nil) + dotspacemacs-server-socket-dir nil + + ;; If non-nil, advise quit functions to keep server open when quitting. + ;; (default nil) + dotspacemacs-persistent-server nil + + ;; List of search tool executable names. Spacemacs uses the first installed + ;; tool of the list. Supported tools are `rg', `ag', `pt', `ack' and `grep'. + ;; (default '("rg" "ag" "pt" "ack" "grep")) + dotspacemacs-search-tools '("rg" "ag" "pt" "ack" "grep") + + ;; Format specification for setting the frame title. + ;; %a - the `abbreviated-file-name', or `buffer-name' + ;; %t - `projectile-project-name' + ;; %I - `invocation-name' + ;; %S - `system-name' + ;; %U - contents of $USER + ;; %b - buffer name + ;; %f - visited file name + ;; %F - frame name + ;; %s - process status + ;; %p - percent of buffer above top of window, or Top, Bot or All + ;; %P - percent of buffer above bottom of window, perhaps plus Top, or Bot or All + ;; %m - mode name + ;; %n - Narrow if appropriate + ;; %z - mnemonics of buffer, terminal, and keyboard coding systems + ;; %Z - like %z, but including the end-of-line format + ;; (default "%I@%S") + dotspacemacs-frame-title-format "%I@%S" + + ;; Format specification for setting the icon title format + ;; (default nil - same as frame-title-format) + dotspacemacs-icon-title-format nil + + ;; Delete whitespace while saving buffer. Possible values are `all' + ;; to aggressively delete empty line and long sequences of whitespace, + ;; `trailing' to delete only the whitespace at end of lines, `changed' to + ;; delete only whitespace for changed lines or `nil' to disable cleanup. + ;; (default nil) + dotspacemacs-whitespace-cleanup nil + + ;; If non nil activate `clean-aindent-mode' which tries to correct + ;; virtual indentation of simple modes. This can interfer with mode specific + ;; indent handling like has been reported for `go-mode'. + ;; If it does deactivate it here. + ;; (default t) + dotspacemacs-use-clean-aindent-mode t + + ;; If non-nil shift your number row to match the entered keyboard layout + ;; (only in insert state). Currently supported keyboard layouts are: + ;; `qwerty-us', `qwertz-de' and `querty-ca-fr'. + ;; New layouts can be added in `spacemacs-editing' layer. + ;; (default nil) + dotspacemacs-swap-number-row nil + + ;; Either nil or a number of seconds. If non-nil zone out after the specified + ;; number of seconds. (default nil) + dotspacemacs-zone-out-when-idle nil + + ;; Run `spacemacs/prettify-org-buffer' when + ;; visiting README.org files of Spacemacs. + ;; (default nil) + dotspacemacs-pretty-docs nil + + ;; If nil the home buffer shows the full path of agenda items + ;; and todos. If non nil only the file name is shown. + dotspacemacs-home-shorten-agenda-source nil)) + +(defun dotspacemacs/user-env () + "Environment variables setup. +This function defines the environment variables for your Emacs session. By +default it calls `spacemacs/load-spacemacs-env' which loads the environment +variables declared in `~/.spacemacs.env' or `~/.spacemacs.d/.spacemacs.env'. +See the header of this file for more information." + (spacemacs/load-spacemacs-env)) + +(defun dotspacemacs/user-init () + "Initialization for user code: +This function is called immediately after `dotspacemacs/init', before layer +configuration. +It is mostly for variables that should be set before packages are loaded. +If you are unsure, try setting them in `dotspacemacs/user-config' first." + (setq python-shell-interpreter "/home/hsv/common/scr/ipython.sh") + ) + +(defun dotspacemacs/user-load () + "Library to load while dumping. +This function is called only while dumping Spacemacs configuration. You can +`require' or `load' the libraries of your choice that will be included in the +dump." + ) + +(defun dotspacemacs/user-config () + "Configuration for user code: +This function is called at the very end of Spacemacs startup, after layer +configuration. +Put your configuration code here, except for variables that should be set +before packages are loaded." + (global-set-key (kbd "") 'centaur-tabs-forward) + (global-set-key (kbd "") 'centaur-tabs-backward) + (evil-ex-define-cmd "q" 'kill-this-buffer) + (evil-ex-define-cmd "quit" 'evil-quit) + (spacemacs/toggle-whitespace-globally-on) + (setq whitespace-display-mappings + ;; all numbers are Unicode codepoint in decimal. ⁖ (insert-char 182 1) + '( + (space-mark 32 [183] [46]) ; 32 SPACE 「 」, 183 MIDDLE DOT 「·」, 46 FULL STOP 「.」 + (newline-mark 10 [182 10]) ; 10 LINE FEED + (tab-mark 9 [172 9] [92 9]) ; 9 TAB, 172 Not Sign「¬」 + )) + (set-face-attribute 'whitespace-space nil + :background nil + :foreground "gray30") + (set-face-attribute 'whitespace-tab nil + :background nil + :foreground "gray30") + (set-face-attribute 'whitespace-newline nil + :background nil + :foreground "gray30") + ) + +;; Do not write anything past this comment. This is where Emacs will +;; auto-generate custom variable definitions. +(defun dotspacemacs/emacs-custom-settings () + "Emacs custom settings. +This is an auto-generated function, do not modify its content directly, use +Emacs customize menu instead. +This function is called at the very end of Spacemacs initialization." +(custom-set-variables + ;; custom-set-variables was added by Custom. + ;; If you edit it by hand, you could mess it up, so be careful. + ;; Your init file should contain only one such instance. + ;; If there is more than one, they won't work right. + '(evil-want-Y-yank-to-eol nil) + '(helm-completion-style 'emacs) + '(package-selected-packages + '(centaur-tabs yaml-mode yasnippet-snippets lsp-ui lsp-python-ms lsp-pyright lsp-origami origami lsp-latex helm-lsp helm-company helm-c-yasnippet fuzzy flycheck-ycmd flycheck-rtags flycheck-pos-tip pos-tip flycheck-ocaml dap-mode lsp-treemacs bui treemacs cfrs pfuture posframe company-ycmd company-rtags company-reftex company-math company-c-headers company-auctex company-anaconda ccls lsp-mode ht dash-functional auto-yasnippet yasnippet ac-ispell auto-complete neotree insert-shebang helm-gtags ggtags flycheck-bashate fish-mode counsel-gtags counsel swiper company-shell company ycmd request-deferred yapfify sphinx-doc pytest pyenv-mode py-isort poetry pippel pipenv pyvenv pip-requirements org-ref pdf-tools key-chord ivy htmlize tablist mmm-mode math-symbol-lists markdown-toc live-py-mode importmagic epc ctable concurrent deferred helm-rtags rtags helm-pydoc helm-bibtex bibtex-completion biblio parsebib biblio-core google-c-style gh-md disaster cython-mode cpp-auto-include blacken auctex anaconda-mode pythonic utop tuareg caml treemacs-magit smeargle ocp-indent ocamlformat merlin-eldoc merlin magit-svn magit-section magit-gitflow magit-popup helm-gitignore helm-git-grep gitignore-templates gitignore-mode gitconfig-mode gitattributes-mode git-timemachine git-messenger git-link forge markdown-mode ghub closql emacsql-sqlite emacsql treepy evil-magit magit git-commit with-editor transient dune ws-butler writeroom-mode winum which-key volatile-highlights vi-tilde-fringe uuidgen use-package undo-tree treemacs-projectile treemacs-persp treemacs-icons-dired treemacs-evil toc-org symon symbol-overlay string-inflection spaceline-all-the-icons restart-emacs request rainbow-delimiters popwin pcre2el password-generator paradox overseer org-superstar open-junk-file nameless move-text macrostep lorem-ipsum link-hint indent-guide hybrid-mode hungry-delete hl-todo highlight-parentheses highlight-numbers highlight-indentation helm-xref helm-themes helm-swoop helm-purpose helm-projectile helm-org helm-mode-manager helm-make helm-ls-git helm-flx helm-descbinds helm-ag google-translate golden-ratio font-lock+ flycheck-package flycheck-elsa flx-ido fancy-battery eyebrowse expand-region evil-visualstar evil-visual-mark-mode evil-unimpaired evil-tutor evil-textobj-line evil-surround evil-numbers evil-nerd-commenter evil-mc evil-matchit evil-lisp-state evil-lion evil-indent-plus evil-iedit-state evil-goggles evil-exchange evil-escape evil-ediff evil-easymotion evil-cleverparens evil-args evil-anzu eval-sexp-fu emr elisp-slime-nav editorconfig dumb-jump dotenv-mode dired-quick-sort diminish devdocs define-word column-enforce-mode clean-aindent-mode centered-cursor-mode auto-highlight-symbol auto-compile aggressive-indent ace-link ace-jump-helm-line)) + '(whitespace-style + '(face trailing tabs spaces lines newline empty indentation space-after-tab space-before-tab space-mark tab-mark newline-mark))) +(custom-set-faces + ;; custom-set-faces was added by Custom. + ;; If you edit it by hand, you could mess it up, so be careful. + ;; Your init file should contain only one such instance. + ;; If there is more than one, they won't work right. + ) +) diff --git a/scr/ipython.sh b/scr/ipython.sh new file mode 100755 index 0000000..0ec1871 --- /dev/null +++ b/scr/ipython.sh @@ -0,0 +1,6 @@ +#!/usr/bin/env bash + +docker run --rm -it \ + --entrypoint=ipython \ + hub-jupyter \ + -i --simple-prompt diff --git a/symlinks.sh b/symlinks.sh index 1c02643..65d0f92 100755 --- a/symlinks.sh +++ b/symlinks.sh @@ -7,6 +7,7 @@ pushd $HOME >> /dev/null ln -vs $BASE/home/vimrc .vimrc ln -vs $BASE/home/bashrc .bashrc ln -vs $BASE/home/latexmkrc .latexmkrc +ln -vs $BASE/home/spacemacs .spacemacs popd >> /dev/null # Create ftplugin links