common/home/spacemacs/init.el

407 lines
18 KiB
EmacsLisp

"Initialization:
This function is called at the very beginning of Spacemacs startup,
before layer configuration.
It should only modify the values of Spacemacs settings."
;; This setq-default sexp is an exhaustive list of all the supported
;; spacemacs settings.
(setq-default
;; If non-nil then enable support for the portable dumper. You'll need
;; to compile Emacs 27 from source following the instructions in file
;; EXPERIMENTAL.org at to root of the git repository.
;; (default nil)
dotspacemacs-enable-emacs-pdumper nil
;; Name of executable file pointing to emacs 27+. This executable must be
;; in your PATH.
;; (default "emacs")
dotspacemacs-emacs-pdumper-executable-file "emacs"
;; Name of the Spacemacs dump file. This is the file will be created by the
;; portable dumper in the cache directory under dumps sub-directory.
;; To load it when starting Emacs add the parameter `--dump-file'
;; when invoking Emacs 27.1 executable on the command line, for instance:
;; ./emacs --dump-file=$HOME/.emacs.d/.cache/dumps/spacemacs-27.1.pdmp
;; (default (format "spacemacs-%s.pdmp" emacs-version))
dotspacemacs-emacs-dumper-dump-file (format "spacemacs-%s.pdmp" emacs-version)
;; If non-nil ELPA repositories are contacted via HTTPS whenever it's
;; possible. Set it to nil if you have no way to use HTTPS in your
;; environment, otherwise it is strongly recommended to let it set to t.
;; This variable has no effect if Emacs is launched with the parameter
;; `--insecure' which forces the value of this variable to nil.
;; (default t)
dotspacemacs-elpa-https t
;; Maximum allowed time in seconds to contact an ELPA repository.
;; (default 5)
dotspacemacs-elpa-timeout 5
;; Set `gc-cons-threshold' and `gc-cons-percentage' when startup finishes.
;; This is an advanced option and should not be changed unless you suspect
;; performance issues due to garbage collection operations.
;; (default '(100000000 0.1))
dotspacemacs-gc-cons '(100000000 0.1)
;; Set `read-process-output-max' when startup finishes.
;; This defines how much data is read from a foreign process.
;; Setting this >= 1 MB should increase performance for lsp servers
;; in emacs 27.
;; (default (* 1024 1024))
dotspacemacs-read-process-output-max (* 1024 1024)
;; If non-nil then Spacelpa repository is the primary source to install
;; a locked version of packages. If nil then Spacemacs will install the
;; latest version of packages from MELPA. Spacelpa is currently in
;; experimental state please use only for testing purposes.
;; (default nil)
dotspacemacs-use-spacelpa nil
;; If non-nil then verify the signature for downloaded Spacelpa archives.
;; (default t)
dotspacemacs-verify-spacelpa-archives t
;; If non-nil then spacemacs will check for updates at startup
;; when the current branch is not `develop'. Note that checking for
;; new versions works via git commands, thus it calls GitHub services
;; whenever you start Emacs. (default nil)
dotspacemacs-check-for-update nil
;; If non-nil, a form that evaluates to a package directory. For example, to
;; use different package directories for different Emacs versions, set this
;; to `emacs-version'. (default 'emacs-version)
dotspacemacs-elpa-subdirectory 'emacs-version
;; One of `vim', `emacs' or `hybrid'.
;; `hybrid' is like `vim' except that `insert state' is replaced by the
;; `hybrid state' with `emacs' key bindings. The value can also be a list
;; with `:variables' keyword (similar to layers). Check the editing styles
;; section of the documentation for details on available variables.
;; (default 'vim)
dotspacemacs-editing-style 'vim
;; If non-nil show the version string in the Spacemacs buffer. It will
;; appear as (spacemacs version)@(emacs version)
;; (default t)
dotspacemacs-startup-buffer-show-version t
;; Specify the startup banner. Default value is `official', it displays
;; the official spacemacs logo. An integer value is the index of text
;; banner, `random' chooses a random text banner in `core/banners'
;; directory. A string value must be a path to an image format supported
;; by your Emacs build.
;; If the value is nil then no banner is displayed. (default 'official)
dotspacemacs-startup-banner 'random
;; List of items to show in startup buffer or an association list of
;; the form `(list-type . list-size)`. If nil then it is disabled.
;; Possible values for list-type are:
;; `recents' `recents-by-project' `bookmarks' `projects' `agenda' `todos'.
;; List sizes may be nil, in which case
;; `spacemacs-buffer-startup-lists-length' takes effect.
;; The exceptional case is `recents-by-project', where list-type must be a
;; pair of numbers, e.g. `(recents-by-project . (7 . 5))', where the first
;; number is the project limit and the second the limit on the recent files
;; within a project.
dotspacemacs-startup-lists '((recents . 5)
(projects . 7))
;; True if the home buffer should respond to resize events. (default t)
dotspacemacs-startup-buffer-responsive t
;; Default major mode for a new empty buffer. Possible values are mode
;; names such as `text-mode'; and `nil' to use Fundamental mode.
;; (default `text-mode')
dotspacemacs-new-empty-buffer-major-mode 'text-mode
;; Default major mode of the scratch buffer (default `text-mode')
dotspacemacs-scratch-mode 'text-mode
;; If non-nil, *scratch* buffer will be persistent. Things you write down in
;; *scratch* buffer will be saved and restored automatically.
dotspacemacs-scratch-buffer-persistent nil
;; If non-nil, `kill-buffer' on *scratch* buffer
;; will bury it instead of killing.
dotspacemacs-scratch-buffer-unkillable nil
;; Initial message in the scratch buffer, such as "Welcome to Spacemacs!"
;; (default nil)
dotspacemacs-initial-scratch-message nil
;; List of themes, the first of the list is loaded when spacemacs starts.
;; Press `SPC T n' to cycle to the next theme in the list (works great
;; with 2 themes variants, one dark and one light)
dotspacemacs-themes '(noctilux
occidental)
;; Set the theme for the Spaceline. Supported themes are `spacemacs',
;; `all-the-icons', `custom', `doom', `vim-powerline' and `vanilla'. The
;; first three are spaceline themes. `doom' is the doom-emacs mode-line.
;; `vanilla' is default Emacs mode-line. `custom' is a user defined themes,
;; refer to the DOCUMENTATION.org for more info on how to create your own
;; spaceline theme. Value can be a symbol or list with additional properties.
;; (default '(spacemacs :separator wave :separator-scale 1.5))
dotspacemacs-mode-line-theme '(spacemacs :separator wave :separator-scale 1.5)
;; Default font or prioritized list of fonts. The `:size' can be specified as
;; a non-negative integer (pixel size), or a floating-point (point size).
;; Point size is recommended, because it's device independent. (default 10.0)
dotspacemacs-default-font '("Source Code Pro"
:size 14.0
:weight normal
:width normal)
;; If non-nil the cursor color matches the state color in GUI Emacs.
;; (default t)
dotspacemacs-colorize-cursor-according-to-state t
;; The leader key (default "SPC")
dotspacemacs-leader-key "SPC"
;; The key used for Emacs commands `M-x' (after pressing on the leader key).
;; (default "SPC")
dotspacemacs-emacs-command-key "SPC"
;; The key used for Vim Ex commands (default ":")
dotspacemacs-ex-command-key ":"
;; The leader key accessible in `emacs state' and `insert state'
;; (default "M-m")
dotspacemacs-emacs-leader-key "M-m"
;; Major mode leader key is a shortcut key which is the equivalent of
;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",")
dotspacemacs-major-mode-leader-key ","
;; Major mode leader key accessible in `emacs state' and `insert state'.
;; (default "C-M-m" for terminal mode, "<M-return>" for GUI mode).
;; Thus M-RET should work as leader key in both GUI and terminal modes.
;; C-M-m also should work in terminal mode, but not in GUI mode.
dotspacemacs-major-mode-emacs-leader-key (if window-system "<M-return>" "C-M-m")
;; These variables control whether separate commands are bound in the GUI to
;; the key pairs `C-i', `TAB' and `C-m', `RET'.
;; Setting it to a non-nil value, allows for separate commands under `C-i'
;; and TAB or `C-m' and `RET'.
;; In the terminal, these pairs are generally indistinguishable, so this only
;; works in the GUI. (default nil)
dotspacemacs-distinguish-gui-tab nil
;; Name of the default layout (default "Default")
dotspacemacs-default-layout-name "Default"
;; If non-nil the default layout name is displayed in the mode-line.
;; (default nil)
dotspacemacs-display-default-layout nil
;; If non-nil then the last auto saved layouts are resumed automatically upon
;; start. (default nil)
dotspacemacs-auto-resume-layouts nil
;; If non-nil, auto-generate layout name when creating new layouts. Only has
;; effect when using the "jump to layout by number" commands. (default nil)
dotspacemacs-auto-generate-layout-names nil
;; Size (in MB) above which spacemacs will prompt to open the large file
;; literally to avoid performance issues. Opening a file literally means that
;; no major mode or minor modes are active. (default is 1)
dotspacemacs-large-file-size 1
;; Location where to auto-save files. Possible values are `original' to
;; auto-save the file in-place, `cache' to auto-save the file to another
;; file stored in the cache directory and `nil' to disable auto-saving.
;; (default 'cache)
dotspacemacs-auto-save-file-location 'cache
;; Maximum number of rollback slots to keep in the cache. (default 5)
dotspacemacs-max-rollback-slots 5
;; If non-nil, the paste transient-state is enabled. While enabled, after you
;; paste something, pressing `C-j' and `C-k' several times cycles through the
;; elements in the `kill-ring'. (default nil)
dotspacemacs-enable-paste-transient-state nil
;; Which-key delay in seconds. The which-key buffer is the popup listing
;; the commands bound to the current keystroke sequence. (default 0.4)
dotspacemacs-which-key-delay 0.4
;; Which-key frame position. Possible values are `right', `bottom' and
;; `right-then-bottom'. right-then-bottom tries to display the frame to the
;; right; if there is insufficient space it displays it at the bottom.
;; (default 'bottom)
dotspacemacs-which-key-position 'bottom
;; Control where `switch-to-buffer' displays the buffer. If nil,
;; `switch-to-buffer' displays the buffer in the current window even if
;; another same-purpose window is available. If non-nil, `switch-to-buffer'
;; displays the buffer in a same-purpose window even if the buffer can be
;; displayed in the current window. (default nil)
dotspacemacs-switch-to-buffer-prefers-purpose nil
;; If non-nil a progress bar is displayed when spacemacs is loading. This
;; may increase the boot time on some systems and emacs builds, set it to
;; nil to boost the loading time. (default t)
dotspacemacs-loading-progress-bar t
;; If non-nil the frame is fullscreen when Emacs starts up. (default nil)
;; (Emacs 24.4+ only)
dotspacemacs-fullscreen-at-startup nil
;; If non-nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
;; Use to disable fullscreen animations in OSX. (default nil)
dotspacemacs-fullscreen-use-non-native nil
;; If non-nil the frame is maximized when Emacs starts up.
;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
;; (default nil) (Emacs 24.4+ only)
dotspacemacs-maximized-at-startup nil
;; If non-nil the frame is undecorated when Emacs starts up. Combine this
;; variable with `dotspacemacs-maximized-at-startup' in OSX to obtain
;; borderless fullscreen. (default nil)
dotspacemacs-undecorated-at-startup nil
;; A value from the range (0..100), in increasing opacity, which describes
;; the transparency level of a frame when it's active or selected.
;; Transparency can be toggled through `toggle-transparency'. (default 90)
dotspacemacs-active-transparency 90
;; A value from the range (0..100), in increasing opacity, which describes
;; the transparency level of a frame when it's inactive or deselected.
;; Transparency can be toggled through `toggle-transparency'. (default 90)
dotspacemacs-inactive-transparency 80
;; If non-nil show the titles of transient states. (default t)
dotspacemacs-show-transient-state-title t
;; If non-nil show the color guide hint for transient state keys. (default t)
dotspacemacs-show-transient-state-color-guide t
;; If non-nil unicode symbols are displayed in the mode line.
;; If you use Emacs as a daemon and wants unicode characters only in GUI set
;; the value to quoted `display-graphic-p'. (default t)
dotspacemacs-mode-line-unicode-symbols t
;; If non-nil smooth scrolling (native-scrolling) is enabled. Smooth
;; scrolling overrides the default behavior of Emacs which recenters point
;; when it reaches the top or bottom of the screen. (default t)
dotspacemacs-smooth-scrolling t
;; Control line numbers activation.
;; If set to `t', `relative' or `visual' then line numbers are enabled in all
;; `prog-mode' and `text-mode' derivatives. If set to `relative', line
;; numbers are relative. If set to `visual', line numbers are also relative,
;; but lines are only visual lines are counted. For example, folded lines
;; will not be counted and wrapped lines are counted as multiple lines.
;; This variable can also be set to a property list for finer control:
;; '(:relative nil
;; :visual nil
;; :disabled-for-modes dired-mode
;; doc-view-mode
;; markdown-mode
;; org-mode
;; pdf-view-mode
;; text-mode
;; :size-limit-kb 1000)
;; When used in a plist, `visual' takes precedence over `relative'.
;; (default nil)
dotspacemacs-line-numbers '(:visual t
:disabled-for-modes
pdf-view-mode
:size-limit-kb 1000)
;; Code folding method. Possible values are `evil', `origami' and `vimish'.
;; (default 'evil)
dotspacemacs-folding-method 'evil
;; If non-nil `smartparens-strict-mode' will be enabled in programming modes.
;; (default nil)
dotspacemacs-smartparens-strict-mode nil
;; If non-nil pressing the closing parenthesis `)' key in insert mode passes
;; over any automatically added closing parenthesis, bracket, quote, etc...
;; This can be temporary disabled by pressing `C-q' before `)'. (default nil)
dotspacemacs-smart-closing-parenthesis nil
;; Select a scope to highlight delimiters. Possible values are `any',
;; `current', `all' or `nil'. Default is `all' (highlight any scope and
;; emphasis the current one). (default 'all)
dotspacemacs-highlight-delimiters 'all
;; If non-nil, start an Emacs server if one is not already running.
;; (default nil)
dotspacemacs-enable-server nil
;; Set the emacs server socket location.
;; If nil, uses whatever the Emacs default is, otherwise a directory path
;; like \"~/.emacs.d/server\". It has no effect if
;; `dotspacemacs-enable-server' is nil.
;; (default nil)
dotspacemacs-server-socket-dir nil
;; If non-nil, advise quit functions to keep server open when quitting.
;; (default nil)
dotspacemacs-persistent-server nil
;; List of search tool executable names. Spacemacs uses the first installed
;; tool of the list. Supported tools are `rg', `ag', `pt', `ack' and `grep'.
;; (default '("rg" "ag" "pt" "ack" "grep"))
dotspacemacs-search-tools '("rg" "ag" "pt" "ack" "grep")
;; Format specification for setting the frame title.
;; %a - the `abbreviated-file-name', or `buffer-name'
;; %t - `projectile-project-name'
;; %I - `invocation-name'
;; %S - `system-name'
;; %U - contents of $USER
;; %b - buffer name
;; %f - visited file name
;; %F - frame name
;; %s - process status
;; %p - percent of buffer above top of window, or Top, Bot or All
;; %P - percent of buffer above bottom of window, perhaps plus Top, or Bot or All
;; %m - mode name
;; %n - Narrow if appropriate
;; %z - mnemonics of buffer, terminal, and keyboard coding systems
;; %Z - like %z, but including the end-of-line format
;; (default "%I@%S")
dotspacemacs-frame-title-format "%I@%S"
;; Format specification for setting the icon title format
;; (default nil - same as frame-title-format)
dotspacemacs-icon-title-format nil
;; Delete whitespace while saving buffer. Possible values are `all'
;; to aggressively delete empty line and long sequences of whitespace,
;; `trailing' to delete only the whitespace at end of lines, `changed' to
;; delete only whitespace for changed lines or `nil' to disable cleanup.
;; (default nil)
dotspacemacs-whitespace-cleanup nil
;; If non nil activate `clean-aindent-mode' which tries to correct
;; virtual indentation of simple modes. This can interfer with mode specific
;; indent handling like has been reported for `go-mode'.
;; If it does deactivate it here.
;; (default t)
dotspacemacs-use-clean-aindent-mode t
;; If non-nil shift your number row to match the entered keyboard layout
;; (only in insert state). Currently supported keyboard layouts are:
;; `qwerty-us', `qwertz-de' and `querty-ca-fr'.
;; New layouts can be added in `spacemacs-editing' layer.
;; (default nil)
dotspacemacs-swap-number-row nil
;; Either nil or a number of seconds. If non-nil zone out after the specified
;; number of seconds. (default nil)
dotspacemacs-zone-out-when-idle nil
;; Run `spacemacs/prettify-org-buffer' when
;; visiting README.org files of Spacemacs.
;; (default nil)
dotspacemacs-pretty-docs nil
;; If nil the home buffer shows the full path of agenda items
;; and todos. If non nil only the file name is shown.
dotspacemacs-home-shorten-agenda-source nil)