Front chamber separator

nhf/parts/electronics.py

@@ -144,6 +144,7 @@ class BatteryBox18650(Item):
                 centered=(True, True, False),
                 combine=True,
             )
+            .copyWorkplane(Cq.Workplane('XY'))
         )
         hole = Cq.Solid.makeCylinder(
             radius=self.diam_thread/2,

nhf/touhou/yasaka_kanako/onbashira.py

@@ -318,10 +318,10 @@ class Onbashira(Model):
     controller: ArduinoUnoR3 = ArduinoUnoR3()
     controller_loc: Cq.Location = Cq.Location.from2d(-30, -35, 90)
     battery_box_locs: list[Cq.Location] = field(default_factory=lambda: [
-        Cq.Location.from2d(70, -35, 90),
+        Cq.Location.from2d(70, 0, 90),
-        Cq.Location.from2d(140, -35, 90),
+        Cq.Location.from2d(140, 0, 90),
-        Cq.Location.from2d(-70, -35, 90),
+        Cq.Location.from2d(-70, 0, 90),
-        Cq.Location.from2d(-140, -35, 90),
+        Cq.Location.from2d(-140, 0, 90),
     ])
 
     # Distance between bind point and motor's mount points
@@ -1612,12 +1612,17 @@ class Onbashira(Model):
 
     @target(name="chamber-back", kind=TargetKind.DXF)
     def profile_chamber_back(self) -> Cq.Sketch:
+        shift = 180 / self.n_side
         return (
             Cq.Sketch()
-            .regularPolygon(self.side_width - self.side_thickness, self.n_side)
+            .regularPolygon(
+                self.side_width - self.side_thickness,
+                self.n_side,
+                angle=shift)
             .reset()
             .regularPolygon(
                 self.angle_joint_bind_radius, self.n_side,
+                angle=shift,
                 mode="c", tag="bolt")
             .vertices(tag="bolt")
             .circle(self.rotor_bind_bolt_diam/2, mode="s")
@@ -1631,7 +1636,7 @@ class Onbashira(Model):
         )
         # Mark all attachment points
         for i in range(self.n_side):
-            angle = (i+0.5) * math.radians(360 / self.n_side)
+            angle = i * math.radians(360 / self.n_side)
             x = self.angle_joint_bind_radius * math.cos(angle)
             y = self.angle_joint_bind_radius * math.sin(angle)
             result.tagAbsolute(f"holeF{i}", (x,  y, self.side_thickness), direction="+Z")
@@ -1652,6 +1657,38 @@ class Onbashira(Model):
             )
         return a
 
+    @target(name="chamber-front", kind=TargetKind.DXF)
+    def profile_chamber_front(self) -> Cq.Sketch:
+        """
+        Front chamber must allow access to the electronics section
+        """
+        l = self.side_width
+        h = self.side_width
+        h2 = 15
+        return (
+            self.profile_chamber_back()
+            .reset()
+            .rect(l, h, mode="s")
+            .reset()
+            .push([(0, h/2 + h2)])
+            .rect(l/2, h2, mode="s")
+        )
+    def chamber_front(self) -> Cq.Sketch:
+        sketch = self.profile_chamber_front()
+        result = (
+            Cq.Workplane()
+            .placeSketch(sketch)
+            .extrude(self.side_thickness)
+        )
+        # Mark all attachment points
+        for i in range(self.n_side):
+            angle = i * math.radians(360 / self.n_side)
+            x = self.angle_joint_bind_radius * math.cos(angle)
+            y = self.angle_joint_bind_radius * math.sin(angle)
+            result.tagAbsolute(f"holeF{i}", (x,  y, self.side_thickness), direction="+Z")
+            result.tagAbsolute(f"holeB{i}", (x,  -y, 0), direction="-Z")
+        return result
+
     def angle_joint_flange(self) -> Cq.Workplane:
         th = math.pi / self.n_side
         r = self.bulk_radius
@@ -2230,6 +2267,13 @@ class Onbashira(Model):
                 material=self.material_side,
                 role=Role.STRUCTURE | Role.DECORATION,
             )
+        if has_part(parts, "chamber_front"):
+            a = a.addS(
+                self.chamber_front(),
+                name="chamber_front",
+                material=self.material_side,
+                role=Role.STRUCTURE | Role.DECORATION,
+            )
         if has_part(parts, "motor"):
             a = a.add(self.assembly_motor(), name="motor")
         if has_part(parts, "machine"):
@@ -2309,6 +2353,19 @@ class Onbashira(Model):
                 f"{name_bolt}?root",
                 "Plane",
             )
+
+            name_bolt =f"chamber_front{i}boltFPI{i}"
+            a = a.addS(
+                BOLT_COMMON.generate(),
+                name=name_bolt,
+                material=self.material_fastener,
+                role=Role.CONNECTION,
+            )
+            a = a.constrain(
+                f"chamber_front?holeF{i}",
+                f"{name_bolt}?root",
+                "Plane",
+            )
             for ih in range(len(self.angle_joint_bolt_position)):
                 a = a.constrain(
                     f"chamber/side{i}?holeFPI{ih}",
@@ -2325,6 +2382,11 @@ class Onbashira(Model):
                     f"chamber_back?holeB{i}",
                     "Plane",
                 )
+                a = a.constrain(
+                    f"ring3/side{i}?holeStatorR",
+                    f"chamber_front?holeB{i}",
+                    "Plane",
+                )
 
                 #a = a.constrain(
                 #    f"barrel/stator2?holeB{i}",