common/home/doomemacs/config.org

#+TITLE: Doom Emacs Configuration File

* Installation

Execute ~doom sync~ after modifying this file to tangle it to ~config.el~.

Dependencies:
- Doom Emacs: ~git~ ~ripgrep~, ~fd-find~
- ~lilypond-mode~: ~LilyPond~
- ~:app everywhere~: ~xwininfo~, ~xdotool~, ~xclip~, ~xprop~
Individual packages may have other optional dependencies. Execute ~doom doctor~ to find out.

The following block of comments is from the default configuration.

#+begin_src emacs-lisp
;;; $DOOMDIR/config.el -*- lexical-binding: t; -*-

;; Place your private configuration here! Remember, you do not need to run 'doom
;; sync' after modifying this file!

;; Whenever you reconfigure a package, make sure to wrap your config in an
;; `after!' block, otherwise Doom's defaults may override your settings. E.g.
;;
;;   (after! PACKAGE
;;     (setq x y))
;;
;; The exceptions to this rule:
;;
;;   - Setting file/directory variables (like `org-directory')
;;   - Setting variables which explicitly tell you to set them before their
;;     package is loaded (see 'C-h v VARIABLE' to look up their documentation).
;;   - Setting doom variables (which start with 'doom-' or '+').
;;
;; Here are some additional functions/macros that will help you configure Doom.
;;
;; - `load!' for loading external *.el files relative to this one
;; - `use-package!' for configuring packages
;; - `after!' for running code after a package has loaded
;; - `add-load-path!' for adding directories to the `load-path', relative to
;;   this file. Emacs searches the `load-path' when you load packages with
;;   `require' or `use-package'.
;; - `map!' for binding new keys
;;
;; To get information about any of these functions/macros, move the cursor over
;; the highlighted symbol at press 'K' (non-evil users must press 'C-c c k').
;; This will open documentation for it, including demos of how they are used.
;; Alternatively, use `C-h o' to look up a symbol (functions, variables, faces,
;; etc).
;;
;; You can also try 'gd' (or 'C-c c d') to jump to their definition and see how
;; they are implemented.
#+end_src

These packages are loaded into ~packages.el~. The following comments are provided by default.

#+begin_src emacs-lisp :tangle packages.el
;; -*- no-byte-compile: t; -*-
;;; $DOOMDIR/packages.el

;; To install a package with Doom you must declare them here and run 'doom sync'
;; on the command line, then restart Emacs for the changes to take effect -- or
;; use 'M-x doom/reload'.


;; To install SOME-PACKAGE from MELPA, ELPA or emacsmirror:
;(package! some-package)

;; To install a package directly from a remote git repo, you must specify a
;; `:recipe'. You'll find documentation on what `:recipe' accepts here:
;; https://github.com/radian-software/straight.el#the-recipe-format
;(package! another-package
;  :recipe (:host github :repo "username/repo"))

;; If the package you are trying to install does not contain a PACKAGENAME.el
;; file, or is located in a subdirectory of the repo, you'll need to specify
;; `:files' in the `:recipe':
;(package! this-package
;  :recipe (:host github :repo "username/repo"
;           :files ("some-file.el" "src/lisp/*.el")))

;; If you'd like to disable a package included with Doom, you can do so here
;; with the `:disable' property:
;(package! builtin-package :disable t)

;; You can override the recipe of a built in package without having to specify
;; all the properties for `:recipe'. These will inherit the rest of its recipe
;; from Doom or MELPA/ELPA/Emacsmirror:
;(package! builtin-package :recipe (:nonrecursive t))
;(package! builtin-package-2 :recipe (:repo "myfork/package"))

;; Specify a `:branch' to install a package from a particular branch or tag.
;; This is required for some packages whose default branch isn't 'master' (which
;; our package manager can't deal with; see radian-software/straight.el#279)
;(package! builtin-package :recipe (:branch "develop"))

;; Use `:pin' to specify a particular commit to install.
;(package! builtin-package :pin "1a2b3c4d5e")


;; Doom's packages are pinned to a specific commit and updated from release to
;; release. The `unpin!' macro allows you to unpin single packages...
;(unpin! pinned-package)
;; ...or multiple packages
;(unpin! pinned-package another-pinned-package)
;; ...Or *all* packages (NOT RECOMMENDED; will likely break things)
;(unpin! t)
#+end_src


* User specific settings

Some functionality uses this to identify you, e.g. GPG configuration, email
clients, file templates and snippets. It is optional. This could be changed to
rely on system environment variables.

#+begin_src emacs-lisp
(setq
	user-full-name "Leni Ven"
	user-mail-address "leniv@stanford.edu")
#+end_src

If you use ~org~ and don't want your org files in the default location below,
change ~org-directory~. It must be set before org loads!

#+begin_src emacs-lisp
(setq org-directory "~/org/")
#+end_src

* Interface

** Key Bindings

Modifications to the default key bindings to mimic spacemacs

- ~SPC SPC~ is mapped to ~M-x~ (~#'execute-extended-command~)
- ~SPC !~ is mapped to ~M-!~ (~#'shell-command~)
- ~SPC :~ is mapped to ~M-:~ (~#'eval-expression~)
- ~,~ is mapped to the local (major mode) leader ~,~
- ~SPC b 0~ deletes the current buffer and window like Spacemacs ~SPC b x~

#+begin_src emacs-lisp
(setq doom-localleader-key ",")
(map! :leader
	:desc "Execute shell command"
	"!" #'shell-command)
(map! :leader
	:desc "Execute extended command (emacs M-x)"
	"SPC" #'execute-extended-command)
(map! :leader
	:desc "Evaluate expression (emacs M-:)"
	":" #'eval-expression)
(map! :leader
	:desc "Kill buffer and window"
	"b 0" #'kill-buffer-and-window)
(map! :nvi "C" nil) ; remove this one weird binding
#+end_src

** Font settings

Doom exposes five (optional) variables for controlling fonts in Doom:

- ~doom-font~ -- the primary font to use
- ~doom-variable-pitch-font~ -- a non-monospace font (where applicable)
- ~doom-big-font~ -- used for ~doom-big-font-mode~; use this for
  presentations or streaming.
- ~doom-unicode-font~ -- for unicode glyphs
- ~doom-serif-font~ -- for the ~fixed-pitch-serif~ face

See ~C-h v doom-font~ for documentation and more examples of what they
accept.

If you or Emacs can't find your font, use ~M-x describe-font~ to look them up,
~M-x eval-region~ to execute ELisp code, and ~M-x doom/reload-font~ to refresh
your font settings. If Emacs still can't find your font, it likely wasn't
installed correctly. Font issues are rarely Doom issues!

There are two ways to load a theme. Both assume the theme is installed and
available. You can either set ~doom-theme~ or manually load a theme with the
~load-theme~ function.

#+begin_src emacs-lisp
(setq
	default-font "Source Code Pro"
	default-font-size 14.0
	doom-font (font-spec
		:family default-font
		:size default-font-size
		:weight 'semi-light)
	doom-variable-pitch-font (font-spec
		:family default-font
		:size (+ default-font-size 1.0))
	doom-unicode-font (font-spec
		:family default-font
		:size default-font-size)
	doom-theme 'doom-lantern)
#+end_src

** Splash Screen

#+begin_src emacs-lisp
(defun sun-position-banner ()
	(let* (
		(sunrise '(
			"⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢰⡆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀"
			"⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢸⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀"
			"⠀⠀⠀⣤⣄⠀⠀⠀⠀⢾⡀⠀⠀⠸⠇⠀⠀⢀⡷⠀⠀⠀⠀⣠⣤⠀⠀⠀"
			"⠀⠀⠀⠈⠻⣷⣄⠀⠀⠈⠁⠀⠀⣀⣀⠀⠀⠈⠁⠀⠀⣠⣾⠟⠁⠀⠀⠀"
			"⠀⠀⠀⠀⠀⠈⠁⠀⠀⢀⣴⣾⣿⣿⣿⣿⣷⣦⡀⠀⠀⠈⠁⠀⠀⠀⠀⠀"
			"⠀⠀⢠⣤⣀⠀⠀⠀⣴⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣦⠀⠀⠀⣀⣤⡄⠀⠀"
			"⠀⠀⠀⠀⠁⠀⠀⣼⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣧⠀⠀⠈⠀⠀⠀⠀"
			"⢠⣤⣤⣤⣤⣤⣤⣤⣤⣤⣤⣤⣤⣤⣤⣤⣤⣤⣤⣤⣤⣤⣤⣤⣤⣤⣤⡄"
			"⠈⠉⠉⠉⠉⠉⠉⠉⠉⠉⠉⠉⠉⠉⠉⠉⠉⠉⠉⠉⠉⠉⠉⠉⠉⠉⠉⠁"))
		     (longest-line (apply #'max (mapcar #'length sunrise))))
		(put-text-property
			(point)
			(dolist (line sunrise (point))
				(insert (+doom-dashboard--center
				         +doom-dashboard--width
				         (concat line (make-string (max 0 (- longest-line (length line))) 32)))
				        "\n"))
		 'face 'doom-dashboard-banner)))
(setq +doom-dashboard-ascii-banner-fn #'sun-position-banner)
#+end_src

** Line numbers

This determines the style of line numbers in effect. If set to ~nil~, line
numbers are disabled. For relative line numbers, set this to ~relative~.

#+begin_src emacs-lisp
(setq display-line-numbers-type 'relative)
#+end_src

** Indentation Style Hooks

#+begin_src emacs-lisp
(defun custom/common-program-hook ()
	(setq
		whitespace-style '(face spaces tabs newline trailing space-mark tab-mark newline-mark)
		whitespace-line-column 80)
	(display-line-numbers-mode)
	(display-fill-column-indicator-mode)
	(setq
		indent-tabs-mode t
		indent-line-function 'tab-to-tab-stop
		tab-width 3)
	(indent-tabs-mode)
	(smart-tabs-mode-enable)
)
(defun custom/common-richtext-hook ()
	(setq whitespace-style '(face spaces tabs newline trailing space-mark tab-mark newline-mark))
	(setq whitespace-line-column nil)
	(display-line-numbers-mode)
)

(add-hook 'text-mode-hook #'custom/common-richtext-hook)
#+end_src

* Package-specific Settings

** Editor

*** Smart Tabs

#+begin_src emacs-lisp :tangle packages.el
(package! smart-tabs-mode)
#+end_src

#+begin_src emacs-lisp
(use-package! smart-tabs-mode
	:config
	(print! "Configuring smart-tabs-mode")
	(smart-tabs-insinuate
		'c 'c++
		'java
		'javascript))
(setq-default
	indent-tabs-mode t
	indent-line-function 'tab-to-tab-stop
	tab-width 3)
#+end_src

*** Whitespace mode

#+begin_src emacs-lisp :tangle packages.el
(package! whitespace)
#+end_src

#+begin_src emacs-lisp
(use-package! whitespace
	:config
	(setq
		whitespace-style '(face tabs tab-mark spaces space-mark trailing newline newline-mark)
		whitespace-line-column 80
		whitespace-display-mappings
		'(
			(space-mark 32 [183] [46]) ; 32 SPACE 「 」, 183 MIDDLE DOT 「·」, 46 FULL STOP 「.」
			(newline-mark 10 [172 10]) ; 10 LINE FEED, 172 Not Sign「¬」
			(tab-mark 9 [10141 9] [92 9]) ; 9 TAB, 10141 Triangle-headed rightwards arrow 「➝」
		))
	(global-whitespace-mode +1)
	)
#+end_src

*** Format

Note that ~onsave~ was intentionally turned off because it messes with version control systems.

#+begin_src emacs-lisp
(after! format
	(print! "Configuring (after! format ...)")
	'(not
		emacs-lisp-mode
		sql-mode ; Broken
		;; tex related modes are broken
		tex-mode
		latex-mode
		bibtex-mode
	))
#+end_src

*** Spell

#+begin_src emacs-lisp
(after! flyspell
	(print! "Configuring (after! flyspell ...)")
	(setq flyspell-default-dictionary "english"))
#+end_src

** Languages

*** Emacs Lisp

#+begin_src emacs-lisp
(defun custom/lisp-family-hook ()
	(setq
		indent-line-function 'tab-to-tab-stop
		tab-width 3)
	(indent-tabs-mode)
	(display-line-numbers-mode)
	)
(add-hook 'lisp-mode-hook       #'custom/lisp-family-hook)
(add-hook 'lisp-data-mode-hook  #'custom/lisp-family-hook)
(add-hook 'emacs-lisp-mode-hook #'custom/lisp-family-hook)
#+end_src

*** Org

Rather than using a common prefix ~, i~ like Spacemacs to consolidate all
insertion operations, we put them in different categories. Some keybindings are
removed.

#+begin_src emacs-lisp
(map! :after org
	:localleader
	:map org-mode-map
	:desc "LaTeX Preview"             "X" #'org-latex-preview
	;; Remove some clutter
	"h" nil
	"n" nil
	"i" nil
	"@" nil
	"q" nil
	"o" nil
	"I" nil ; 'org-id-get-create'
	"A" nil ; 'org-archive-subtree'
	(:prefix ("b". "table")
	 :desc "Edit formulae"           "F" #'org-table-edit-formulas
	 :desc "Eval formula"            "f" #'org-table-eval-formula
	 (:prefix ("m" . "move")
	  :desc "Move row up"            "K" #'org-table-move-row-up
	  :desc "Move row down"          "J" #'org-table-move-row-down
	  :desc "Move column left"       "H" #'org-table-move-column-left
	  :desc "Move column right"      "L" #'org-table-move-column-right
	  :desc "Move cell up"           "k" #'org-table-move-cell-up
	  :desc "Move cell down"         "j" #'org-table-move-cell-down
	  :desc "Move cell left"         "h" #'org-table-move-cell-left
	  :desc "Move cell right"        "l" #'org-table-move-cell-right
	  )
	 )
	(:prefix ("h" . "headings")
	 :desc "Consult heading"          "." #'consult-org-heading
	 :desc "Insert heading"           "h" #'org-insert-heading
	 :desc "Insert todo heading"      "t" #'org-insert-todo-heading
	 :desc "Insert subheading"        "i" #'org-insert-subheading
	 :desc "Insert todo subheading"   "t" #'org-insert-todo-subheading
	 :desc "Previous visible heading" "[" #'org-previous-visible-heading
	 :desc "Next visible heading"     "]" #'org-next-visible-heading
	 )
	(:prefix ("o" . "tags/properties")
	 :desc "Set tags command"         "t" #'org-set-tags-command
	 :desc "Set property"             "s" #'org-set-property
	 :desc "Delete property"          "d" #'org-delete-property
	 :desc "Property action"          "a" #'org-property-action
	 )
	(:prefix ("i" . "insert")
	 :desc "Item"                     "i" #'org-toggle-item
	 :desc "Citation"                 "c" #'org-cite-insert
	 :desc "Footnote"                 "f" #'org-footnote-new
	 :desc "Id"                       "I" #'org-id-get-create
	 )
	(:prefix ("l" . "links")
	 ;; Description update
	 :desc "Insert/Modify Link"       "l" #'org-insert-link
	 )
	)
#+end_src

*** LaTeX

The target indentation style of ~LaTeX~ is as follows:

#+begin_src tex :tangle no
\section{A section}
% No indent here

\begin{enumerate}[1.]
\item Some item 1. Note that item is not indented.

	Item 1 continued. 1 level of indentation.
\item
	\begin{tikzpicture}[
			xscale=2,yscale=3
		]
		\node[dot] (x) at (0,0);
		\node[dot] (y) at (0,1);
		\draw (x) -- (y)
			\node[midway,fill=white] {$f$};
	\end{tikzpicture}
\end{enumerate}
#+end_src

For some reason the keymap binding has to use ~LaTeX-mode-map~ or ~TeX-mode-map~
instead of ~latex-mode-map~. Also some original keybindings are removed so they
can be displayed correctly in prompts. See e.g. ~tex-buf.el~ for an example.

When unbinding these keys, use ~:g~ flag to ensure no extraneous keys are
introduced.

#+begin_src emacs-lisp
(after! latex
	(print! "Configuring (after! latex ...)")
	(add-hook 'tex-mode-hook       #'custom/common-program-hook)
	(add-hook 'LaTeX-mode-hook     #'custom/common-program-hook)
	(setq-default TeX-electric-sub-and-superscript nil)
	(local-unset-key "C-c C-l")
	(local-unset-key "C-c `")
	)
(map! :after latex
	:localleader
	:map TeX-mode-map
	:desc "View Compilation Log" "l" #'TeX-recenter-output-buffer
	:desc "Next Error"           "e" #'TeX-next-error
	:desc "Close Environment"    "]" #'LaTeX-close-environment
	(:prefix ("f" . "Fold")
	 :desc "Fold Mode"           "f" #'TeX-fold-mode
	 :desc "Environment"         "e" #'TeX-fold-env
	 :desc "Buffer"              "b" #'TeX-fold-buffer
	 :desc "Region"              "r" #'TeX-fold-region
	 :desc "Paragraph"           "p" #'TeX-fold-paragraph
	 :desc "Dwim"                "d" #'TeX-fold-dwim)
	)
(map! :after latex
	:map TeX-mode-map
	:g "C-c C-l" nil
	:g "C-c `" nil
	)
#+end_src

*** Lean 4

#+begin_src emacs-lisp :tangle packages.el
(package! lean4-mode :recipe (
		:host github
		:repo "leanprover/lean4-mode"
		:files ("*.el" "data")))
#+end_src
#+begin_src emacs-lisp
(map! :after lean4-mode
	:localleader
	:map lean4-mode-map
	:desc "Execute"               "R" #'lean4-execute
	:desc "Execute in standalone" "r" #'lean4-std-exe
	:desc "Toggle info buffer"    "t" #'lean4-toggle-info
	(:prefix ("e" . "Error")
	 :desc "Previous error"       "p" #'flycheck-previous-error
	 :desc "Next error"           "n" #'flycheck-next-error
	 :desc "List error"           "l" #'flycheck-list-errors
	 )
	:desc "Lake build"            "b" #'lean4-lake-build
	(:prefix ("p" . "leanpkg")
	 :desc "Test"                 "t" #'lean4-leanpkg-test
	 :desc "Build"                "b" #'lean4-leanpkg-build
	 :desc "Configure"            "c" #'lean4-leanpkg-configure
	 )
	)
#+end_src

*** LilyPond

Add the necessary hooks for LilyPond mode.

FIXME: Defer initialisation

#+begin_src emacs-lisp

(use-package! lilypond-mode
	:init
		(print! "Initializing LilyPond-mode")
		(add-to-list 'auto-mode-alist '("\\.ly\\'" . LilyPond-mode))
	;:after-call LilyPond-mode
	:config
		(add-hook 'LilyPond-mode-hook  #'custom/common-program-hook)
)
#+end_src

** Tools

*** LSP

File path is removed from breadcrumb since it is provided by ~doom-modeline~ and
since it clutters the header-line.

#+begin_src emacs-lisp
(after! lsp-mode
	(print! "Configuring (after! lsp-mode ...)")
	(setq
		lsp-headerline-breadcrumb-enable t
		lsp-headerline-breadcrumb-enable-symbol-numbers nil
		lsp-headerline-breadcrumb-segments '(symbols)
	))
#+end_src

*** Magit

#+begin_src emacs-lisp
(map! :after magit
	:localleader
	:map git-commit-mode-map
	:desc "Finish" "c" #'with-editor-finish
	:desc "Cancel" "q" #'with-editor-cancel
	)
#+end_src

Temporarily pin the versions at 28.2 due to ~defvar-keymap~ being a Emacs 29
addition. See [[https://emacs.stackexchange.com/questions/75827/doom-emacs-error-running-hook-global-git-commit-mode-because-void-variable][this stackexchange post]].

#+begin_src emacs-lisp :tangle packages.el
(package! transient
	:pin "c2bdf7e12c530eb85476d3aef317eb2941ab9440"
	:recipe (:host github :repo "magit/transient"))
(package! with-editor
	:pin "bbc60f68ac190f02da8a100b6fb67cf1c27c53ab"
	:recipe (:host github :repo "magit/with-editor"))
#+end_src

*** Emacs IPython Notebook (ein)

Adapted from [[https://gist.github.com/millejoh/8632402a11384a3a0949fa350a1a271b]]

Usage: Since ~ein:notebooklist-mode~, ~ein:markdown-mode~, and
~ein:traceback-mode~ are major modes, their hotkeys are triggered by the local
leader ~,~/~SPC m~. However the ~ein:notebook-mode~ and
~ein:notebook-multilang-mode~ are minor modes and they are triggered by ~C-c~
instead of ~,~.

FIXME: Cleanup ~ein:markdown-mode-map~.

#+begin_src emacs-lisp
(defun custom/ein:worksheet-merge-cell-next ()
	(interactive)
	(ein:worksheet-merge-cell-km (ein:worksheet--get-ws-or-error) (ein:worksheet-get-current-cell) t t))
(map! :after ein
	;:localleader
	:map ein:notebooklist-mode-map ; Major mode
	"" nil
	:desc "Describe mode"          "h" #'describe-mode
	:desc "Reload"                 "r" #'ein:notebooklist-reload
	:desc "File open"              "o" #'ein:file-open
	:desc "Open"                   "O" #'ein:notebook-open
	:desc "Prev item"              "[" #'ein:notebooklist-prev-item
	:desc "Next item"              "]" #'ein:notebooklist-next-item
	:desc "New notebook"           "n" #'ein:notebooklist-new-notebook
	:desc "New notebook with name" "N" #'ein:notebooklist-new-notebook-with-name
)
(map! :after ein
	:localleader
	:map ein:markdown-mode-map ; Major mode
	:desc "Up"      "K" #'ein:markdown-move-up
	:desc "Down"    "J" #'ein:markdown-move-down
	:desc "Promote" "H" #'ein:markdown-move-up
	:desc "Demote"  "L" #'ein:markdown-move-down
	:desc "Do"      "e" #'ein:markdown-do
	:desc "Cycle"   "c" #'ein:markdown-cycle
)
(map! :after ein
	:map ein:notebook-mode-map ; Minor mode
	:prefix "C-c"
	"" nil ; Remove all keys
	;; Python
	:desc "Jump back"          "," #'ein-pytools-jump-back-command
	:desc "Jump to source"     "." #'ein-pytools-jump-to-source-command
	;; Cell
	:desc "Copy cell"          "y" #'ein:worksheet-copy-cell-km
	:desc "Yank cell"          "p" #'ein:worksheet-yank-cell-km
	:desc "kill cell"          "d" #'ein:worksheet-kill-cell-km
	:desc "Insert below"       "i" #'ein:worksheet-insert-cell-below-km
	:desc "Insert above"       "I" #'ein:worksheet-insert-cell-above-km
	:desc "Goto next input"    "j" #'ein:worksheet-goto-next-input-km
	:desc "Goto prev input"    "k" #'ein:worksheet-goto-prev-input-km
	:desc "Move cell down"     "J" #'ein:worksheet-move-cell-down-km
	:desc "Move cell up"       "K" #'ein:worksheet-move-cell-up-km
	:desc "Change cell type"   "u" #'ein:worksheet-change-cell-type-km
	:desc "Toggle cell type"   "t" #'ein:worksheet-toggle-cell-type-km
	:desc "Merge cell"         "m" #'ein:worksheet-merge-cell-km
	:desc "Merge cell next"    "M" #'custom/ein:worksheet-merge-cell-next
	:desc "Split cell"         "s" #'ein:worksheet-split-cell-at-point-km
	:desc "Execute cell and goto next" "RET" #'ein:worksheet-execute-cell-and-goto-next-km
	;; Notebook
	:desc "Move prev"          "H" #'ein:notebook-worksheet-move-prev
	:desc "Move next"          "L" #'ein:notebook-worksheet-move-next
	(:prefix ("o" . "Output")
	 :desc "Toggle output"      "t" #'ein:worksheet-toggle-output-km
	 :desc "Clear output"       "c" #'ein:worksheet-clear-output
	 :desc "Clear all output"   "C" #'ein:worksheet-clear-all-output
	 :desc "Set output visibility" "v" #'ein:worksheet-set-output-visibility-all-km
	 :desc "Show code cell"     "s" #'ein:shared-output-show-code-cell-at-point-km
	)
	(:prefix ("e" . "Execute")
	 :desc "All cells"             "a" #'ein:worksheet-execute-all-cells
	 :desc "All cells above"       "K" #'ein:worksheet-execute-all-cells-above
	 :desc "All cells below"       "J" #'ein:worksheet-execute-all-cells-below
	 :desc "Cell and go to next"   "RET" #'ein:worksheet-execute-cell-and-goto-next-km
	 :desc "Cell and insert below" "j" #'ein:worksheet-execute-cell-and-insert-below-km
	)
	(:prefix ("f" . "File")
	 :desc "Open console"       "c"   #'ein:console-open
	 :desc "Open prev or last"  "h" #'ein:notebook-worksheet-open-prev-or-last
	 :desc "Open next or first" "l" #'ein:notebook-worksheet-open-next-or-first
	 :desc "Insert next"        "n" #'ein:notebook-worksheet-insert-next
	 :desc "Open 1"             "1" #'ein:notebook-worksheet-open-1th
	 :desc "Open 2"             "2" #'ein:notebook-worksheet-open-2th
	 :desc "Open 3"             "3" #'ein:notebook-worksheet-open-3th
	 :desc "Open 4"             "4" #'ein:notebook-worksheet-open-4th
	 :desc "Open 5"             "5" #'ein:notebook-worksheet-open-5th
	 :desc "Open 6"             "6" #'ein:notebook-worksheet-open-5th
	 :desc "Open 7"             "7" #'ein:notebook-worksheet-open-7th
	 :desc "Open 8"             "8" #'ein:notebook-worksheet-open-8th
	 :desc "Open last"          "9" #'ein:notebook-worksheet-open-last
	 :desc "Close notebook"     "x" #'ein:notebook-close
	 :desc "Save notebook"      "s" #'ein:notebook-save-notebook-command
	 :desc "Rename sheet"       "R" #'ein:worksheet-rename-sheet
	 :desc "Rename notebook"    "C-r" #'ein:notebook-rename-command
	 :desc "Worksheet Delete"   "d" #'ein:notebook-worksheet-delete
	)
)
(map! :after ein-multilang
	:map ein:notebook-multilang-mode-map ; Minor mode
	:prefix "C-c"
	:desc "Execute cell"               "RET" #'ein:worksheet-execute-cell
	:desc "Execute cell and goto next" "<C-return>" #'ein:worksheet-execute-cell-and-goto-next
	:desc "Goto next input" "gj" 'ein:worksheet-goto-next-input
	:desc "Goto prev input" "gk" 'ein:worksheet-goto-prev-input
	:desc "Move cell down"  "M-j" 'ein:worksheet-move-cell-down
	:desc "Move cell up"    "M-k" 'ein:worksheet-move-cell-up
)
#+end_src