aniva
/
Cosplay
1
1
Fork 0
Code Issues 3 Pull Requests 2 Packages Projects Releases Wiki Activity

cosplay: Touhou/Yasaka Kanako #11

Merged
aniva merged 61 commits from touhou/yasaka-kanako into main 2025-06-16 10:16:58 -07:00
Conversation 2 Commits 61 Files Changed 11 +3313 -6
aniva commented 2025-01-20 21:48:23 -08:00
Owner
Copy Link

Gatling gun is here

  • Beta version target: FanimeCon '25 (2025/05/23)
  • Full version target: TouhouFest '25 (2025/06/11)
Gatling gun is here - Beta version target: FanimeCon '25 (2025/05/23) - Full version target: TouhouFest '25 (2025/06/11)
aniva added the
category
cosplay
part/Structure
part/Clothing
part/Electronic
 labels 2025-01-20 21:48:23 -08:00
aniva self-assigned this 2025-01-20 21:48:23 -08:00
aniva added 1 commit 2025-02-24 00:21:48 -08:00
aniva added 1 commit 2025-02-24 00:54:54 -08:00
aniva added 1 commit 2025-02-25 21:04:48 -08:00
aniva added 1 commit 2025-04-08 23:28:41 -07:00
aniva added 1 commit 2025-04-20 12:49:20 -07:00
aniva added 1 commit 2025-04-22 11:17:02 -07:00
aniva added 1 commit 2025-05-09 13:58:34 -07:00
aniva added 1 commit 2025-05-12 12:24:50 -07:00
aniva added 1 commit 2025-05-12 14:51:16 -07:00
aniva added 1 commit 2025-05-12 22:08:59 -07:00
aniva added 1 commit 2025-05-12 23:33:39 -07:00
aniva added 1 commit 2025-05-12 23:52:58 -07:00
aniva added 1 commit 2025-05-12 23:59:42 -07:00
aniva added 1 commit 2025-05-13 00:02:57 -07:00
aniva added 1 commit 2025-05-13 09:11:58 -07:00
aniva added 1 commit 2025-05-13 14:29:33 -07:00
aniva added 1 commit 2025-05-13 17:21:06 -07:00
aniva added 1 commit 2025-05-14 13:13:59 -07:00
aniva added 1 commit 2025-05-14 22:41:10 -07:00
aniva added 1 commit 2025-05-14 23:09:08 -07:00
aniva added 1 commit 2025-05-14 23:21:25 -07:00
aniva added 1 commit 2025-05-15 13:23:55 -07:00
aniva added 1 commit 2025-05-15 20:55:30 -07:00
aniva added 1 commit 2025-05-15 21:20:48 -07:00
aniva added 1 commit 2025-05-15 23:16:56 -07:00
aniva added 1 commit 2025-05-16 07:16:04 -07:00
aniva commented 2025-05-16 12:56:33 -07:00
Author
Owner
Copy Link

We need some mechanism at the front of the barrel to ensure the side panels don't diverge. Maybe some kind of small angle joint?

We need some mechanism at the front of the barrel to ensure the side panels don't diverge. Maybe some kind of small angle joint?
aniva added 1 commit 2025-05-20 08:18:22 -07:00
aniva added 1 commit 2025-05-20 08:24:46 -07:00
aniva added 1 commit 2025-05-20 19:47:48 -07:00
aniva added 1 commit 2025-05-21 20:26:05 -07:00
aniva commented 2025-05-22 12:25:27 -07:00
Author
Owner
Copy Link

The bearing mechanism doesn't work due to several problems:

  1. The flexibility of the acrylic panels means the bearing balls would fall out
    2.The acrylic panels reach too close to the edge,making it impossible to install side panels on top of them
  2. There is a gap between the bearing balls and the inner disk, meaning the whole thing would wobble when spinning.

Surprisingly, weight was not an issue.

I propose using double-conical bearing cylinders instead. These cylinders could then be bolted onto a track. By adjusting the spacing between bearing disks, we can have very fine-grained control of the gaps between bearing cylinders.

This would require us to re-print the first ring of angle joints, and re-cut acrylic panels.

Moreover, the stator should be glued to each other at 12 points along the perimeter in order to prevent warping.

The bearing mechanism doesn't work due to several problems: 1. The flexibility of the acrylic panels means the bearing balls would fall out 2.The acrylic panels reach too close to the edge,making it impossible to install side panels on top of them 3. There is a gap between the bearing balls and the inner disk, meaning the whole thing would wobble when spinning. Surprisingly, weight was not an issue. I propose using double-conical bearing cylinders instead. These cylinders could then be bolted onto a track. By adjusting the spacing between bearing disks, we can have very fine-grained control of the gaps between bearing cylinders. This would require us to re-print the first ring of angle joints, and re-cut acrylic panels. Moreover, the stator should be glued to each other at 12 points along the perimeter in order to prevent warping.
aniva added 1 commit 2025-05-28 08:01:30 -07:00
aniva added 1 commit 2025-05-28 23:49:20 -07:00
aniva added 1 commit 2025-05-29 00:14:27 -07:00
aniva added 1 commit 2025-05-29 00:53:11 -07:00
aniva added 1 commit 2025-05-29 01:19:35 -07:00
aniva added 1 commit 2025-05-29 09:22:59 -07:00
aniva added 1 commit 2025-05-29 14:07:32 -07:00
aniva added 1 commit 2025-05-29 16:21:23 -07:00
aniva added 1 commit 2025-05-29 17:24:23 -07:00
aniva added 1 commit 2025-05-29 23:40:31 -07:00
aniva added 1 commit 2025-05-30 00:29:00 -07:00
aniva added 1 commit 2025-05-30 00:32:51 -07:00
aniva added 1 commit 2025-05-30 01:22:56 -07:00
aniva added 1 commit 2025-05-30 01:33:34 -07:00
aniva added 1 commit 2025-05-30 01:36:07 -07:00
aniva added 1 commit 2025-05-30 01:54:32 -07:00
aniva added 1 commit 2025-05-30 10:21:09 -07:00
aniva added 1 commit 2025-05-30 14:20:39 -07:00
aniva added 1 commit 2025-05-30 14:36:10 -07:00
aniva added 1 commit 2025-05-30 18:01:02 -07:00
aniva added 1 commit 2025-05-30 22:31:20 -07:00
aniva added 1 commit 2025-05-31 07:42:07 -07:00
aniva added 1 commit 2025-06-01 22:53:33 -07:00
aniva added 1 commit 2025-06-02 22:49:01 -07:00
aniva added 1 commit 2025-06-03 00:53:53 -07:00
aniva added 1 commit 2025-06-03 09:11:22 -07:00
aniva added 2 commits 2025-06-03 18:50:50 -07:00
aniva added 1 commit 2025-06-10 00:54:03 -07:00
aniva added 1 commit 2025-06-11 15:30:49 -07:00
aniva added 1 commit 2025-06-16 10:16:47 -07:00
aniva merged commit 2a405f916a into main 2025-06-16 10:16:58 -07:00
Sign in to join this conversation.
Reviewers
No reviewers
Labels
Clear labels   
category
build
Versioning, Build System, Structure

  
category
cosplay

  
category
lib
Materials, algorithms, presets

  
category
tool
Tools for measurement and photography

  
part/Clothing

Sewing patterns

  
part/Electronic

Electronic components and microcontrollers

  
part/Structure

CAD

No Label
category
build
category
cosplay
category
lib
category
tool
part/Clothing
part/Electronic
part/Structure
Milestone
Clear milestone
No items
No Milestone
Projects
Clear projects
No project
Assignees
Clear assignees
No Assignees
aniva
1 Participants
Notifications
Due Date
The due date is invalid or out of range. Please use the format 'yyyy-mm-dd'.

No due date set.

Dependencies

No dependencies set.

Reference: aniva/Cosplay#11
No description provided.
Delete Branch "touhou/yasaka-kanako"

Deleting a branch is permanent. Although the deleted branch may continue to exist for a short time before it actually gets removed, it CANNOT be undone in most cases. Continue?